|
Proportion
|
Put the liquid into running water with a ratio 1: 10~50 (avoid hard water such as well water or ground water) (according to different processing requirement).
|
|
Ingredients
|
Green product for the environment
|
|
Using range
|
Applied to all types of Wire-cutting Electric Discharge machine. It can be also used as cooling liquid for metal-cutting processes.
|
|
Features
|
This product was developed for the requirement of super high speed cutting at the speed of 300mm2/min. Adjusting the ratio with different processing requirement, and this product is still being tested.
-
Different ratio with different processing requirement, dissolves quickly, use conveniently.
-
Uniform and white finish surface without black & white stripe normally seen (cleaned by kerosene).
-
Recommended ratio is 1: 20, it can be added ratio to 1: 10 under large energy condition (average cutting current is over 9～10A).
-
Workpiece is easy to take off and clean, and the workbench is also clean.
-
Suitable for cutting within 500mm thickness die steel, it is also suitable for multiple-cut.
|
|
Expire Date
|
12 Months
|
|
Package
|
2KG Special Plastic Bottle. 18KG/BOX, (2×9 bottles)
|
|
Precautions and appearance
|
-
The product is claybank ointment and the diluted liquid is light milky white. Add the ointment and water in proportion when replenishing liquid.
-
Please use the magnet to suck the workpiece before processing is finished, and avoid breaking molybdenum wire.
|
|
Quality standard
|
Q/ZJRX 001-2004
|
