|
Proportion
|
Put the liquid into running water with a ratio 1: 5～15 (avoid hard water such as well water or ground water) (according to different processing requirement).
|
|
Ingredients
|
Green product for the environment
|
|
Using range
|
Applied to all types of Wire-cutting Electric Discharge machine. It can be also used as cooling liquid for metal-cutting processes.
|
|
Features
|
-
Uniform and white finish surface without black & white stripe normally seen (cleaned by kerosene).
-
Recommended ratio is 1: 10, appropriate to increase the ratio to 1: 5 when cutting current over 10A and reduce the ratio to 1: 15～20 when cutting current within 5A. It can improve machining efficiency more than 10000 mm2/h and Ra within 1.5µm under the specified condition in WEDM-MS.
-
Workpiece is easy to take off and clean, and the workbench is also clean.
-
Suitable for cutting within 500mm thickness die steel , it is also suitable for multiple-cut.
|
|
Expire Date
|
12 Months
|
|
Package
|
Liquid using steel bucket (10 KG)
|
|
Precautions and appearance
|
-
The primary liquid is yellow and the diluted liquid is light milky white. This product has excellent cleaning performance, and add the primary liquid and water in proportion when replenishing liquid.
-
Please use the magnet to suck the workpiece before processing is finished, and avoid breaking molybdenum wire.
|
|
Quality standard
|
Q/ZJRX 001-2004
|
