|
Proportion
|
Put the liquid into running water with a ratio 1: 20～50 (avoid hard water such as well water or ground water) (according to different processing requirement).
|
|
Ingredients
|
Green product for the environment
|
|
Using range
|
Applied to all types of Wire-cutting Electric Discharge machine. It can be also used as cooling liquid for metal-cutting processes.
|
|
Features
|
This ointment product was developed for the requirement of high efficiency machining of MS-WEDM. The first cutting current can reach over 10 A and the best surface quality of Ra less than 0.6μm can be obtained.
-
Different ratio with different processing requirement, dissolves quickly, use conveniently.
-
Uniform and white finish surface without black & white stripe normally seen (cleaned by kerosene).
-
Under large energy condition (average cutting current is more than 10 A), the overall cutting speed of more than 10000mm2/h can be achieved after one main cut and two trim cuts (the ratio is about 1: 20).
-
Workpiece is easy to take off and clean, and the workbench is also clean.
-
Suitable for cutting within 500mm thickness die steel, it is also suitable for multiple-cut.
|
|
Expire Date
|
12 Months
|
|
Package
|
2KG Special Plastic Bottle. 18KG/BOX, (2×9 bottles)
|
|
Precautions and appearance
|
-
The product is claybank ointment and the diluted liquid is light milky white. Add the ointment and water in proportion when replenishing liquid.
-
Please use the magnet to suck the workpiece before processing is finished, and avoid breaking molybdenum wire.
|
|
执行标准
|
Q/ZJRX 001-2004
|
